Bosch SMV4HTX24E User Manual Download Page 8

Page: 8 / 60

Safety

If the insulation of the power cord is damaged, this is danger-
ous.

▶

Never let the power cord come into contact with hot appli-
ance parts or heat sources.

▶

Never let the power cord come into contact with sharp
points or edges.

▶

Never kink, crush or modify the power cord.

Damaged appliance

Follow the safety instructions if the appliance is damaged.

WARNING ‒ Risk of electric shock!

If the appliance or the power cord is damaged, this is danger-
ous.

▶

Never operate a damaged appliance.

▶

Never operate an appliance with a cracked or fractured sur-
face.

▶

Never pull on the power cord to unplug the appliance. Al-
ways unplug the appliance at the mains.

▶

If the appliance or the power cord is damaged, immediately
unplug the power cord or switch off the fuse in the fuse box
and turn off the water tap.

▶

"Call Customer Service." →

Page 55

▶

Repairs to the appliance should only be carried out by
trained specialist staff.

Incorrect repairs are dangerous.

▶

Repairs to the appliance should only be carried out by
trained specialist staff.

▶

Only use genuine spare parts when repairing the appliance.

▶

If the power cord of this appliance is damaged, it must be
replaced with a special connection cable, which is available
from the manufacturer or his Customer Service.

Summary of Contents for SMV4HTX24E





























































Search results

Summary of Contents for SMV4HTX24E

Reviews:

Related manuals for SMV4HTX24E

Brands by name

Popular brands

Bosch SMV4HTX24E, User Manual

Search results

Summary of Contents for SMV4HTX24E

Reviews:

Related manuals for SMV4HTX24E

Brands by name

Popular brands