Bosch SMV4EVX14E User Manual Download Page 45

Page: 45 / 60

Troubleshooting

Fault

Cause

troubleshooting

E:32-00 will light up altern-
ately or indicator for water
supply lights up.

Clean the filter.

Re-insert the filter in the supply
hose.

Screw the water connection back
on.

Check the water connection for
leaks.

10.

Restore the power supply.

11.

Switch the appliance on.

E:92-40 will light up altern-
ately.

Filters are soiled or blocked.

▶

Clean the filters.

→

"Cleaning filters", Page 41

E:61-03 will light up altern-
ately. Water is not drained.

Wastewater hose is blocked
or kinked.

Reposition the wastewater hose
without kinks.

Remove residues.

Siphon connection is still
sealed.

▶

Check the connection to the siphon
and open if necessary.

Cover of the wastewater
pump is loose.

▶

Secure the cover of the Wastewater
pump

→

Page 56

so it clicks into

position.

E:61-02 will light up altern-
ately.

Wastewater pump is
blocked.

▶

Clean the wastewater pump.

→

"Clean wastewater pump",

Page 56

Cover of the wastewater
pump is loose

▶

Secure the cover of the Wastewater
pump

→

Page 56

so it clicks into

position.

E:90-01 will light up altern-
ately.

Mains voltage is too low.

This is not a fault on the appliance.

Contact an electrician.

Have the mains voltage and elec-
trical installation checked by an
electrician.

Summary of Contents for SMV4EVX14E





























































Search results

Summary of Contents for SMV4EVX14E

Reviews:

Related manuals for SMV4EVX14E

Brands by name

Popular brands

Bosch SMV4EVX14E, User Manual

Search results

Summary of Contents for SMV4EVX14E

Reviews:

Related manuals for SMV4EVX14E

Brands by name

Popular brands