background image

en 

Safety

8

¡

If the insulation of the power cord is damaged, this is danger-
ous.

Never let the power cord come into contact with hot appli-
ance parts or heat sources.

Never let the power cord come into contact with sharp
points or edges.

Never kink, crush or modify the power cord.

Damaged appliance

Follow the safety instructions if the appliance is damaged.

WARNING ‒ Risk of electric shock!

¡

If the appliance or the power cord is damaged, this is danger-
ous.

Never operate a damaged appliance.

Never operate an appliance with a cracked or fractured sur-
face.

Never pull on the power cord to unplug the appliance. Al-
ways unplug the appliance at the mains.

If the appliance or the power cord is damaged, immediately
unplug the power cord or switch off the fuse in the fuse box
and turn off the water tap.

"Call Customer Service." → 

Page 53

Repairs to the appliance should only be carried out by
trained specialist staff.

¡

Incorrect repairs are dangerous.

Repairs to the appliance should only be carried out by
trained specialist staff.

Only use genuine spare parts when repairing the appliance.

If the power cord of this appliance is damaged, it must be
replaced with a special connection cable, which is available
from the manufacturer or his Customer Service.

Summary of Contents for SMV2ITX18E





























































Reviews: