Bosch SMU4HCW56S, User Manual

Page: 13 / 60

Installation and connection
en
13
Installation and connection
Installation and connec-
tion
Installation and connection
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note:
The appliance was tested at
the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡
Dishwasher
¡
Operating instructions
¡
Installation Instructions
¡
Warranty
¡
Installation material
¡
Steam guard plate
¡
Mains cable
¡
Quick reference guide
Installing and connecting the
appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
1.
"Follow the safety instructions."
→
Page 4
2.
"Follow the instructions for elec-
trical connection." →
Page 14
3.
Check the Scope of supply and
the condition of the appliance.
4.
Consult the installation instructions
for the installation dimensions re-
quired.
5.
Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6.
"Install the drainage connection."
→
Page 13
7.
"Install the drinking water connec-
tion." →
Page 14
8.
Connect the appliance to the
power supply.
Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
1.
Consult the installation instructions
supplied for the steps required
here.
2.
Connect the wastewater hose to
the outlet connection of the siphon
using the enclosed parts.
3.
When doing so, check that the
wastewater hose is not kinked,
crushed or twisted.
4.
Also check that there is no cover
in the drainage system preventing
the wastewater from being dis-
charged.