Softening SystemNL
To prevent damage to the device,
water with a hardness of more than 7
°dH must be softened.
Overview of the water hardness settings
Here you will find an overview of the adjustable water hardness values.
You can request the water hardness from your local water company or determine it
with a water hardness tester.
Water hardness °dH
0 - 6
7 - 8
9 - 10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
Hardness Range
soft
soft
average
average
average
hard
hard
hard
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
Set value
H00
H01
H02
H03
H04
H05
H06
H07
NoteSet the device to the
determined water hardness.
With a water hardness of 0 - 6 °dH you
do not need to use softening salt and
you can switch off the water softening.
†Switching off water softening",
4.
Just as often on
the desired water hardness has
been set.
press until
The factory setting is H04.
5.
To save the settings, press . for
about 3 seconds
to press.
Softening salt
You can soften the water with
softening salt.
Set water softening
Filling softening salt
Set the device to the water hardness.
If the Refill softener salt indicator
lights up, top up the softener salt in
the softener salt reservoir
immediately before the program
starts. The amount of softening salt
required depends on the water
hardness. The higher the water
hardness, the greater the amount of
softening salt required.
1.
Determine the water hardness and the
desired setting value.
2.
Press.
3.
Approx. 3 seconds on
to access the basic settings.
Busy-
aThe display shows Hxx. aThe display
shows
to give.
25
