Bosch SMU4HAI48S User Manual Download Page 46

Page: 46 / 60

Troubleshooting

Fault

Cause

troubleshooting

Remnants of food on table-
ware.

Washing programme selec-
ted too weak.

▶

Select a more intensive washing
programme.

→

"Programmes", Page 18

Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.

▶

Only remove large remnants of food
and do not prerinse tableware.

Tall narrow receptacles in
corner areas are not rinsed
adequately.

▶

Do not position tall narrow recept-
acles at too great an angle or in
corner areas.

Top baskets on right and left
are not set to same height.

▶

Set the top baskets on the left and
right to the same level.

→

"Top basket", Page 21

Detergent residue in the ap-
pliance

Lid of the detergent dis-
penser is blocked by items
of tableware parts and will
not open.

Arrange tableware in the top basket
tableware so the tab collecting tray
is not obstructed by tableware.

→

"Arrange tableware", Page 31

Items of tableware are blocking the
dispenser lid.

Do not place tableware or fra-
grance dispensers in the tablet col-
lecting tray.

The lid of the detergent dis-
penser is blocked by the tab
and will not open.

▶

Position the tab in the detergent dis-
penser crosswise, not vertically.

Tabs are used in the quick
or short programme. Dissolv-
ing time of the tab is not at-
tained.

▶

Select a more intensive "Pro-
gramme"

or use

Washing effect and dissolv-
ing performance are re-
duced after a prolonged
storage time or detergent is
very lumpy.

▶

Change your "detergent"

→

Page 27

Summary of Contents for SMU4HAI48S





























































Search results

Summary of Contents for SMU4HAI48S

Reviews:

Related manuals for SMU4HAI48S

Brands by name

Popular brands

Bosch SMU4HAI48S, User Manual

Search results

Summary of Contents for SMU4HAI48S

Reviews:

Related manuals for SMU4HAI48S

Brands by name

Popular brands