background image

en 

Installation and connection

12

the temperature and run time are ad-
ditionally adjusted to the level of soil-
ing.

Efficient Dry

The appliance door opens automatic-
ally during the drying phase. This en-
sures a particularly economical dry-
ing result.
For best drying results wait until the
end of programme before unloading
the tableware. The programme has
ended when the display shows
"0h:00m".
If automatic door opening is deactiv-
ated, energy consumption increases
and the drying phase is usually
shortened. 
→ 

"Overview of basic settings",

Page 33

Installation and connection

Installation and connec-
tion

Installation and connection

To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.

Scope of supply

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.

Note: 

The appliance has been tested

at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:

¡

Dishwasher

¡

Operating instructions

¡

Installation Instructions

¡

Further information documents

¡

Installation material

¡

Salt filling aid funnel

¡

Mains cable

¡

Quick reference guide

Installing and connecting the
appliance

You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.

1.

"Follow the safety instructions."
→ 

Page 4

2.

"Follow the instructions for elec-
trical connection." → 

Page 13

3.

Check the Scope of supply and
the condition of the appliance.

4.

Consult the installation instructions
for the installation dimensions re-
quired.

5.

Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.

6.

"Install the drainage connection."
→ 

Page 13

7.

"Install the drinking water connec-
tion." → 

Page 13

8.

Connect the appliance to the
power supply.

Summary of Contents for SMS6TCI00E





























































Reviews: