en
16
TurboSpeed 20 min.
TurboSpeed 20 min. – especially
quick rinsing programme with
one-off preheating*
* depending on model
The appliance is heated up once
(approx. 25 min.),
then
the appliance is
loaded and several quick rinse cycles
(20 min. each) can run in succession.
Note
Detergent tablets are
not
suitable for this
programme, as the detergent cannot
completely dissolve within the short time.
Therefore always use powder detergents
and ensure that the salt and rinse aid
dispensers are always filled and set to the
correct value (see chapters entitled “Salt”
and “Rinse aid”).
Please read the operation carefully, the
programme differs from the other
programmes.
–
Close the door.
–
Switch on ON/OFF switch
(
.
The display of the last selected
programme flashes.
–
Select programme TurboSpeed 20
min.
•
flashes on the digital display
)"
(
•
= Heating phase).
–
Press START button
P
.
The heating up phase of the empty
appliance starts. If the appliance is
loaded before the heating phase, the
duration of the heating phase is
extended.
•
and the remaining heating
up time are indicated alternately on the
digital display
)"
.
–
As soon as
p
(
p
= Load) flashes, open
and load the appliance and start the
rinsing phase by pressing the START
button
P
.
Attention!
Interior is hot.
The remaining running time is indicated
on the digital display
)"
.
–
As soon as
‹
:
‹‹
is indicated on the
digital display
)"
, the rinse cycle has
ended.
–
Remove utensils.
Attention!
The utensils are hot and
sensitive to shock!
p
flashes on the digital display
)"
.
–
If more rinse cycles are required,
reload dishwasher and press the
START button.
–
If no more rinse cycles are required,
switch off ON/OFF switch
(
.