en
Home Connect
34
Basic setting
Display text
Selection
Description
Remote start
rc1
1
rc0 - rc2
Activate or deactivate remote start.
The following settings are possible:
¡
With the "rc0" setting, remote
start is permanently deactivated.
¡
With the "rc1" setting, remote
start can be selected via the re-
mote start button.
¡
With the "rc2" setting, remote
start is permanently activated.
Factory setting
rE
Start with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Press .
2.
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a
The display shows
.
3.
Press
repeatedly until
the display shows the required set-
ting.
4.
Press
repeatedly until the dis-
play shows the right value.
You can change several settings.
5.
To save the settings, press
for 3 seconds.
Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the Home Connect app.
¡
WLAN home network (Wi-Fi)",
Page 35
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Note:
Please note the safety precau-
tions in this instruction manual and
make sure that they are also ob-
served when operating the appliance
via the Home Connect app.
→
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.