background image

en 

Safety

6

WARNING ‒ Risk of fire!

It is dangerous to use an extended power cord and non-ap-
proved adapters.

Do not use extension cables or multiple socket strips.

If the power cord is too short, contact Customer Service.

Only use adapters approved by the manufacturer.

WARNING ‒ Risk of burns!

If the appliance is not installed properly, this may result in
burns.

With free-standing appliances, ensure that they are installed
with the back panel against a wall.

Safe use

Follow these safety instructions when using the appliance.

WARNING ‒ Risk of serious harm to health!

Failure to comply with safety instructions and directions for
use on packagings of detergent and rinse aid products may
cause serious harm to health.

Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products.

WARNING ‒ Risk of explosion!

¡

Adding solvents to the interior of the appliance may cause ex-
plosions.

Never add solvents to the interior of the appliance.

¡

Highly caustic alkaline or highly acidic cleaning agents in con-
junction with aluminium parts in the interior of the appliance
may cause explosions.

Never use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in
conjunction with aluminium parts (e.g. grease filters of ex-
tractor hoods or aluminium pans), e.g. for the Machine Care
programme.

Summary of Contents for SMS4HDW52E





























































Reviews: