background image

If your appliance is fitted with Aqua-Stop, you can leave your appliance unattended 
during operation and leave the tap turned on afterwards. The tap should only 
be turned off if you are absent from home for a prolonged period, e.g. several 
weeks holiday.

A prerequisite for the warranty claim is that the appliance has been correctly 
installed and connected with Aqua-Stop according to our instructions. 
This also includes the correct installation of the Aqua-Stop extension
(original accessory). Our warranty does not extend to defective feed lines 
or fittings up to the Aqua-Stop connection on the tap.

This liability guarantee is valid for the service life of the appliance.

If our Aqua-Stop system is defective and causes water damage, 
we will make good the damage for private users. 
To ensure water damage protection, the appliance 

must

 be connected 

to the power supply.

In addition to warranty claims against the seller based on the purchase contract 

and 

in addition to our appliance warranty

 we will pay damages under the following 

conditions:

1.

2.

3.

4.

AQUA-STOP guarantee

Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34 
81739 München

(does not apply to appliances without Aqua-Stop)

en

GB

Please find the contact data of all countries in the enclosed 
customer service list.

Internet: www.bosch-home.com

To book an engineer visit and product advice

IE

0844 / 8928979

01450 2655

Calls from a BT landline will be charged at up 
to 3 pence per minute. 
A call set-up free of up to 6 pence may apply.

9000 405 137 en (8906)

640MA

Summary of Contents for SMI 63M05





























Reviews: