Bosch SM SERIES, User Manual

Page: 15 / 68

Installation and connection
en
15
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
1.
Follow the safety instructions.
→
Page 4
2.
Follow the instructions for electrical
connection. →
Page 15
3.
Check the Scope of supply
→
Page 14 and the condition of
the appliance.
4.
Consult the installation instructions
for the installation dimensions re-
quired.
5.
Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6.
Install the drainage connection.
→
Page 15
7.
Install the drinking water connec-
tion. →
Page 15
8.
Connect the appliance to the elec-
tricity supply.
Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
1.
Consult the installation instructions
supplied for the steps required
here.
2.
Connect the wastewater hose to
the outlet connection of the siphon
using the enclosed parts.
3.
When doing so, check that the
wastewater hose is not kinked,
crushed or twisted.
4.
Also check that there is no cover
in the drainage system preventing
the wastewater from being dis-
charged.
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note:
If you are replacing the appli-
ance, you must use a new water sup-
ply hose.
1.
Consult the installation instructions
supplied for the steps required
here.
2.
Connect the appliance to the drink-
ing water connection using the en-
closed parts.
Observe the Technical data
→
Page 66 .
3.
When doing so, check that the
drinking water connection is not
kinked, crushed or twisted.
Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to the
electricity supply
Notes
¡
Follow the Safety instructions
→
Page 5 .
¡
Connect the appliance to alternat-
ing current only, in the range of
220 - 240 V and 50 Hz or 60 Hz.
¡
Please note that the water safety
system is only functional if there is
a power supply.
1.
Insert the non-heating appliance
plug of the power cable into the
appliance.
2.
Insert the mains plug of the appli-
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.