operation
en
31
Tip:
To deactivate timer program-
ming, press repeatedly until "h:00"
appears in the display.
15.6 Starting the programme
▶
Press
.
a
The programme has ended when
the display shows "0:00".
Notes
¡
You can only change a pro-
gramme when running if you can-
cel it.
→
¡
The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
15.7 Interrupting programme
Note:
When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1.
Press .
a
The programme is saved and the
appliance switches off.
2.
Press to resume the pro-
gramme.
15.8 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
▶
Press
for approx.
3 seconds.
a
The programme is cancelled and
ends after approx. 1 minute.
15.9 Switching off appliance
1.
Please note the information on
Safe use →
2.
Press .
3.
To prevent damage from dripping
water, turn the water tap off tight
(not applicable to appliances with
Aqua-Stop).
Tip:
If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
