Basic settings
en
31
16 Basic settings
You can configure the basic settings for your appliance to meet your needs.
16.1 Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Selection
Description
Water hardness
Scale with 4 levels
Set the water hardness.
→
Rinse aid disp.
Scale with 4 levels
Set the amount of rinse
aid to be dispensed or
switch off.
→
Extra Dry
On
Off
1
Switch ExtraDry on or off
for each operation.
For a better drying result
the temperature in the fi-
nal rinse is increased.
This may increase the
run time slightly.
Note:
Please take care
with delicate tableware.
→
1
Factory setting (may vary according to model)
Setting Intensive drying
1.
Press .
2.
Press and hold
.
3.
Turn the programme selector until
flashes.
4.
Release the button.
5.
Turn the programme selector until
the right level has been set.
– If the LED
lights up, Intensive
drying is switched on.
– If the LED
does not light up,
Intensive drying is switched off.
6.
Press
to save the setting.
a
The LEDs go out.
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
▶
Never use detergents containing
chlorine.
