Transportation, storage and disposal
en
45
18.1 Clean wastewater pump
Large remnants of food or foreign
bodies can block the waste water
pump. As soon as the rinsing water
no longer drains properly, the waste
water pump must be cleaned.
WARNING
Risk of injury!
Sharp and pointed objects or frag-
ments of glass may block the waste
water pump and cause injury.
▶
Remove any foreign bodies care-
fully.
1.
Disconnect the appliance from the
power supply.
2.
Remove the basket.
3.
Remove the filter system.
4.
Scoop out any water.
Use a sponge if necessary.
5.
Loosen the screws on the pump
cover (Torx T 20).
6.
Pull up and remove the pump
cover.
7.
Remove any remnants of food and
foreign bodies in the interior.
8.
Insert the pump cover, press down
and screw firmly in place.
9.
Install the filter system.
10.
Insert the basket.
19 Transportation, stor-
age and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.
19.1 Removing the appliance
1.
Disconnect the appliance from the
mains power supply.
2.
Turn off the water tap.
3.
Detach the drainage connection.
4.
Detach the drinking water connec-
tion.
5.
Pull the appliance out carefully,
along with the hose behind it.
