en-us
Operating the Dishwasher
32
Changing the wash cycle
When the
Start
button
(
has been
pressed, the wash cycle cannot be
changed. The only way a wash cycle
can be changed is by terminating the
wash cycle (Reset).
InfoLight
®
*
While the wash cycle is running, a
light spot shines on the floor under
the appliance door.
Do not open the appliance door until
the light point is no longer visible on
the floor.
If the appliance door is not
completely closed, the light spot
flashes*.
If the appliance is installed at
eye-level, with flush furniture front, the
light point is not visible.
In darkened rooms, some light
scattering may be visible. This is
normal and cannot be changed.
You can switch the Infolight on or off.
To change the setting:
1.
Open the door.
2.
Press the
On/Off
button
(
.
3.
Hold down function key
#
and
press
Start
button
P
until the
display
8
indicates
š
:
‹
x (x can
be any number). Release both
buttons.
4.
Press function key
#
until the
display shows
‚
:
‹‚
.
5.
Press the function key
3
to
switch the InfoLight
®
feature on
‚
:
‹‚
or off
‚
:
‹‹
.
6.
Press
Start
button
P
to save
the setting.
* optional feature which may or may
not be included with your
dishwasher.
Intensive drying*
The final rinse uses a higher
temperature which improves the
drying result. The cycle time may
increase slightly. (Caution if utensils
are delicate!)
This feature has two settings:
1.
Open the door.
2.
Press the
On/Off
button
(
.
3.
Hold down function key
#
and
press
Start
button
P
until the
display
8
indicates
š
:x (x can
be any number).
4.
Release both buttons.
5.
Press function key
#
until the
display
8
indicates the factory
set value
š
:
‹‹
.
6.
Press function key
3
to switch
the Extra dry feature on
š
:
‹‚
or
off
š
:
‹‹
.
7.
Press
Start
button
P
to save
setting.
* optional feature which may or may
not be included with your
dishwasher.
‚
:
‹‹
Off
‚
:
‹‚
low
š
:
‹‹
Off
š
:
‹‚
On
