8
Figure 1
Figure 3
Do not
block vent
Figure 2
Figure 4
Rack Accessories
Bottle Holder
Allows you to securely hold tall bottles or vases in the bottom rack. This part is
removable for maximum flexibility. Always check to make sure the upper spray
arm does not contact any tall item places in the lower rack.
To remove the bottle holder, pull both sides of the bottle holder apart until it is
disengaged from the rack. To move it to another position, remove as described
above and hold the sided apart. Hook both ends of the holder to the rack in
another location. See
Figure 1
.
Extra Tall Item Sprinkler
If an item is too tall to be placed in the bottom rack even with the top rack in the
raised position, remove the empty top rack by pulling it out of the dishwasher
until it stops. Pull the front of the rack upward and outward until the rollers are
completely free of the roller guides.
Set the top rack aside. Push the roller guides back into the dishwasher. Insert
the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler
clockwise to lock into position. See
Figure 2
.
Note: Keep the vent on the tub’s right side clear by placing tall items such as plastic
cutting boards and tall baking sheets on the bottom rack’s left side or center.
NOTICE
To avoid dishwasher damage, do not reinstall the top rack without removing the
Extra Tall Item Sprinkler.
Flip Tines
The racks consist of tines that can be folded down depending on what you may
need to load in the rack. To fold down, grasp the folding tine and release from
notch. Push folding tine downward to desired position as shown in
Figure 3
.
RackMatic™ Adjustable Upper Rack
The top rack can be raised or lowered to accommodate large items in either rack. See
Figure 4
.
Note: Before pushing the top rack into the dishwasher, ensure the rack height is the same on both sides. If
the height is not the same on both sides, the dishwasher door will not shut and the top rack spray arm will
not connect to the water inlet.
To lower the top rack:
1
Pull the top rack out of the dishwasher until it stops.
2
Press the RackMatic adjustable top rack handles inward and let the
rack drop gently.
To raise the top rack:
1
Pull the top rack out of the dishwasher until it stops.
2
Grasp the top of the rack above the RackMatic handles and pull it
upward until the handles lock the rack into position (you do not need to
press the handles in order to raise the rack).
