background image

2

1

3 TBS MAX

2 TBS (25 ML) 

1 TBS (15 ML) 

• Use fresh powdered detergent

for best results

• 1 tablespoon will clean most loads
• 3 tablespoons Max, do not overfill
• When using detergent tabs, lay them

flat to avoid contact with the cover

• Using too much detergent can

damage your dishware

*GETTING STARTED

WITH YOUR NEW DISHWASHER

STEP 1- ADDING RINSE AGENT

To add Rinse Agent
pour on the arrow

Turn arrow to
adjust the amount
of rinse agent
dispensed

Add Rinse Agent when the
"Refill Rinse Aid" message
appears on the display

Add
Detergent

To close

If you should
need to open
the cover

STEP 2 - ADDING DETERGENT

STEP 3 - TO START THE DISHWASHER

*ALWAYS READ YOUR USE AND CARE MANUAL FOR DETAILED INSTRUCTIONS

AND IMPORTANT SAFETY NOTICES.

To Contact Customer Service

With the dishwasher door open, locate the label on the right side
of the door. There you will find the:
• Model Number
• Serial Number (FD#########)
• Toll Free Customer Service Phone Number

Run Time

To save energy, this dishwasher has a "Smart Control" that
automatically adjusts the cycle based on soil loads and incom-
ing water temperature. The "Smart Control" makes decisions
that can cause the cycle time and water usage to adjust at
discrete times, and suddenly change in midcycle. The cycle
times listed in the Use and Care manual are based on normal soil
loads and 120°F incoming water and will vary based on your
actual conditions.

When is the Cycle Complete

Depending on model you can tell when your unit has completed
the cycle in one of the following ways. Please refer to your Use
and Care manual for complete details
• Countdown Display at "0"
• Clean Light illuminates
• Cycle completion signal sounds (tone adjustable)
• Cycle indicator light that shines on floor goes out

Canceling a Cycle

Be careful of splash-out.

*To cancel a cycle already in process, open the door only far
enough to expose the control panel, the display will show:
• "Close the door"
• Approximate remaining cycle time
• The current cycle
• The cycle phase
• "Cancel Program"
Press the – button. The display will show "To cancel, close the
door". The dishwasher will then drain the remaining water and
shut off.

FREQUENTLY ASKED

QUESTIONS

For Proper Drying Always use Rinse Agent

 even if your detergent containes Rinse Agent

9000151951 Rev. A • 01/06

Arrow

Turn

Decrease

for

Streaks on

glasses

Increase

for

Spots on

glasses

1

2

Push the blue button in
(NOT DOWN)

         

Lift tab to

       open

Slide cover fully left

Push rear of cover down

firmly until you hear the

         

CLICK

Hidden Top Controls

4) Touch start

3) Select a cycle

2) Turn on

1) Open the door

In order to activate a 

touch control button

, place the entire fingertip over

the button for three seconds

The first time you use your dishwasher you must select a language. These choices
will appear on the display screen:
• AE (American English) / CF (Canadian French) / MS (Mexican Spanish)

Touch the – or + button until the desired language flashes, then touch the
MENU/OK button to save the setting

Start

On 

Off

Menu 

ok

Auto Wash

5) Close the

door to start

Reviews: