Troubleshooting
en-us
35
Dishwasher
does not start.
Door may be ajar or not be properly
latched.
Close door securely until door latch clicks.
No power to the dishwasher (dis-
play won’t come on). Fuse may
have been blown, circuit breaker
may have tripped, power cord may
have been unplugged or dish-
washer may have been turned off.
Replace blown fuse or reset tripped circuit
breaker. Plug power cord into outlet
securely. Press the on/off button
(
to
turn the dishwasher on.
Can’t select a wash cycle since the
previous wash cycle may not have
finished or the dishwasher hasn’t
been reset.
Reset the dishwasher by pressing and hold-
ing the START button for at least three sec-
onds.
Delay start or Child lock may be
activated.
Reset Delay start or Child lock functions
(refer to the appropriate section in this man-
ual).
The door may have been closed
without selecting a wash cycle.
Select a wash cycle and close the door.
Water supply may not be turned on
or connected.
Check and turn on water supply.
Wash cycle
won’t resume
after door was
opened and
closed.
The door has been open for more
than 4 seconds after pressing the
Start
button.
Press
Start
button again and close the dish-
washer door within 4 seconds (see “Protec-
tion against unintentional operation” section
in this manual).
Display does
not illuminate.
A fuse may have been blown or cir-
cuit breaker tripped.
Check the fuse or circuit breaker box and
replace the fuse or reset the breaker if nec-
essary.
Door not closed or latched.
Note:
For models with controls on
top of the door, the display only illu-
minates when the door is opened
and controls are visible.
Ensure door is properly latched and com-
pletely closed.