Bosch SGV4HVX31E User Manual Download Page 6

Page: 6 / 56

Safety

WARNING ‒ Risk of injury!

Hinges move when opening and closing the appliance door

and can cause injury.

▶

If built-under or integrable appliances are not in a cavity so

that one side is accessible, the hinge area must be covered

at the side. Covers are available from Customer Service or

specialist outlets.

WARNING ‒ Risk of tipping!

Improper installation may cause the appliance to tip up.

▶

Only install built-under or integrable appliances under a

continuous worktop that is securely connected to adjacent

cabinets.

Safe use

WARNING ‒ Risk of serious harm to health!

Failure to comply with safety instructions and directions for

use on packagings of detergent and rinse aid products may

cause serious harm to health.

▶

Follow the safety instructions and directions for use on the

packagings of detergent and rinse aid products.

WARNING ‒ Risk of explosion!

Adding solvents to the interior of the appliance may cause ex-

plosions.

▶

Never add solvents to the interior of the appliance.

Highly caustic alkaline or highly acidic cleaning agents in con-

junction with aluminium parts in the interior of the appliance

may cause explosions.

▶

Never use highly caustic alkaline or highly acidic cleaning

agents, in particular commercial or industrial products, in

conjunction with aluminium parts (e.g. grease filters of ex-

tractor hoods or aluminium pans), e.g. for the Machine Care

programme.

Summary of Contents for SGV4HVX31E

























































Search results

Summary of Contents for SGV4HVX31E

Reviews:

Related manuals for SGV4HVX31E

Brands by name

Popular brands

Bosch SGV4HVX31E, User Manual

Search results

Summary of Contents for SGV4HVX31E

Reviews:

Related manuals for SGV4HVX31E

Brands by name

Popular brands