NL Cleaning and maintenance
If the "LED A"
not light up, Extra Dry is switched
off.
If the "LED A"
Page 15 lights up,
Extra Dry is switched on.
R
R
cleaning and maintenance
cleaning and maintenance
Cleaning and maintenance
Carefully clean and maintain your
appliance to ensure that it continues to
work properly for a long time.
5.
To save the settings, press for
approx. 3 seconds.
Cleaning the rinse aid container
Set signal volume
WARNING
Risk of health hazard!
1.
on
to press.
2.
To access the device settings,
press . for 3 seconds
to press.
The use of chlorinated cleaning
agents can lead to health damage.
▶
Never use chlorinated cleaning agents
using resources.
a flashes in the display.
3.
Run up to the
display as many
times.
to press
and clipping
1.
Remove coarse soiling in the
interior with a damp cloth.
4.
Just as often on
press to
the desired signal volume is set.
2.
Pour detergent into the detergent
dispenser.
Depending on the burning mode
0, 1, 2 or 3 LEDs. The set acoustic
signal can be heard.
The factory setting is position 2
3.
Select the program with the
highest temperature.
4. "
5.
To save the settings, press for
approx. 3 seconds.
Detergent
Factory reset
Only use suitable cleaning agents to
clean the appliance.
1.
on
to press.
2.
To access the device settings,
press . for 3 seconds
to press.
a flashes in the display.
Device maintenance tips
3.
Just as many times
until pears on the
display.
to press
,
and cut-
Observe the appliance maintenance
tips in order to maintain the function
of the appliance for a long time.
4.
on
Press to reset the device
to factory settings.
Measure
Benefit
The door seals keep the front and
operating parts clean and hygienic.
dishwasher regular
a The device is reset.
34
