en
16
auto 3in1
The use of so-called combined detergent
products may make the use of rinse aid
and/or salt unnecessary.
There are currently several types of
combined detergent products available.
2in1:
They contain detergent and rinse
aid
or
salt function.
3in1:
They contain detergent, rinse aid
and
salt function.
4in1
: They contain a detergent,
rinse-aid, salt function
and
an additional
glass protection component.
In addition, other combined products with
a comparable effect are offered according
to the manufacturer.
>>>
Always check the type of detergent
or combined product which you
are using!
Always follow the operating instructions
or the information on the packaging.
The rinse programme is automatically
adjusted in order to obtain the best
possible rinsing and drying result.
Observe the following important
information if using combined cleaning
products:
Regeneration salt is not required up to
a water hardness of 21
_
dH (37
_
fH,
26
_
Clarke, 3.7 mmol/l) only. No other
settings on the appliance are required.
Salt is still required if the water
hardness is
above
21
_
dH (37
_
fH,
26
_
Clarke, 3.7 mmol/l). Fill the salt
dispenser with salt
24
and select
setting 6 on the water softening system.
If in doubt, please contact the detergent
manufacturer, especially if:
the utensils are very wet at the end
of the programme.
limescale forms.
Note
Optimum rinsing and drying results can be
obtained by using standard detergents in
conjunction with separate application of
salt and rinse aid.
Observance of the operating instructions
or information on the packaging of the
combined detergents determines their
effectiveness.
Note
Even if the rinse aid and/or salt refill
indicator is lit, the rinse programme runs
correctly when 3in1 products are used.
If the rinse aid refill indicator
6
or salt
refill
5
indicator is defective and you
would like to switch it off, proceed as
follows:
Switching the rinse aid refill
indicator off and on
You can switch the rinse aid refill indicator
6
on or off. This function can be
changed as follows.
Hold down the programme button
3
and press the main switch
1
until the
digital display lights up, then release the
buttons.
9
is indicated on the digital display
(rinse aid refill indicator on).
By pressing the programme button
3
, you can switch off
or switch
on
the rinse aid indicator.
Switch off the main switch
1
;
the setting is saved.
Downloaded from DishWasher-Manual.com Manuals
