Bosch SGS2HTI79E, User Manual

Page: 12 / 56

NL Set up and connect
O
Set up and connect
set up and connect
a continuous worktop that is
permanently connected to the adjacent
cupboards.
O
s
set up and connect
Connect the appliance to electricity
and water in a professional manner
for correct use. Observe the required
criteria and the installation
instructions.
1. "
Observe the safety instructions." →
Page 4
2. "
Observe the instructions for the
electrical connection."
→ Page 13
Scope of supply
3.
Check the contents of the package
and the condition of the device.
After unpacking, check all parts for
transport damage and for
completeness of the delivery.
For complaints, please contact the
store where you purchased the
device or our customer service.
4.
The required installation dimensions can be found
in the installation instructions.
5.
Level the appliance using the
adjustable feet.
Remark: The device has been checked
at the factory for correct operation.
Water stains may remain on the
device. The water spots disappear
after the first wash cycle.
Pay attention to a firm stand.
6. "
Install the waste water
connection." →
Page 12
7. "
Install the drinking water
connection." →
Page 13
The delivery consists of:
s Dishwasher
s Instructions
s Assembly instructions
s Other documents containing information
tie
s Mounting material
s Power cord
s Quick Guide
8.
Connect the device to the
power.
Waste water connection
Connect the appliance to a drain water
connection so that the contaminated
washing water can be drained.
Install waste water connection
Setting up and connecting the
device
1.
The necessary steps can be found in
the supplied installation manual.
You can install your under-counter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the device as
a free-standing device, you must
secure the device against tipping over,
e.g. by screwing it to the wall or
installing it under
2.
Connect the drain hose to the
connection nipple of the siphon
using the supplied parts.
3.
Make sure that the drain hose is
not kinked, crushed or tangled.
4.
Make sure that the water does not
flow out by a sealing cap in the
waste water connection.
12