manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual

The Bosch Security Escort SE2000 Series is a cutting-edge security system designed to ensure maximum safety. To fully understand its advanced features, you can easily access the comprehensive Technical Reference Manual. This invaluable manual can be downloaded for free from manualshive.com, empowering you to make the most of your security system.

Share
Download
background image

120

en | Troubleshooting transponders, points, receivers, and alert units

Security Escort

2017.08 | V2.18.1.0 | DOC

Training Manual

Robert Bosch (SEA) Pte Ltd

Require alarm report

If this checkbox is checked, the operator will be prompted to
complete an alarm report when the alarm is reset from the
screen. If the responding officer is required to complete the
report, or if no system report is desired, this box should not be
checked. If the operator should complete the report then check
this box.

Security alarms silent

If this checkbox is checked, then alarms transmitted by security
or watchman transmitters are to be silent, alerting the operator
at the Central Console, but not sounding the sirens of the alert
units or the horns in the receivers.

Installer alarms silent

If this checkbox is checked, then alarms transmitted by
transmitters issued to installing company representatives and
visitors are to be silent, alerting the operator at the Central
Console, but not sounding the sirens of the alert units or the
horns in the receivers. Typically this checkbox would be checked.

Alarm voice output

If this checkbox is checked, then predefined sound (.WAV) files
can be played at the alarm console for specific alarm types.
Typically this checkbox would not be checked.

Show personal data

If this checkbox is checked, then personal height, build, hair and
eye color data will be displayed on the alarm screen.

No receiver icons

If this checkbox is checked, then individual receiver icons will
not be shown on the alarm map display. Typically this checkbox
would be checked.

Show tests on the map

If this checkbox is checked, tests from subscriber's transmitter
will be displayed on the normal map screen as 

OK

 or 

FAIL

 icons,

signifying a successful test by a valid subscriber or an attempted
test transmission from a transmitter not in the 

Subscriber

Database

. This option doesn’t affect the display the subscriber

receives from a receiver or alert unit’s strobe. Typically this
checkbox would be checked.

All Pager Confm Not Reqd

If this checkbox is checked, the confirmation pager message is
not sent to the any of the pagers when the alarm is
acknowledged by an acknowledgement transmitter.

Suppress Lanyard Alarm

If this checkbox is checked, the lanyard alarm is suppressed and
not reported.

Suppress Man Down Alarm

If this checkbox is checked, the man down alarm is suppressed
and not reported.

Auto silence alarm in 'X'
seconds

This box determines the length of time that the sirens and horns
will sound before being automatically silenced by the Central
Console. When the sounders are automatically silenced in this
way, the Central Console remains in its alarm mode. The
numerical value is in seconds, and it can be set between 0 and
9999. Typically this value would be set to prevent violating local
noise ordinances and it defaults to 240 seconds (4 minutes).

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments

Related manuals for Security Escort SE2000 Series

ABB ControlMaster CM15 Commissioning Instructions preview
ControlMaster CM15
Brand: ABB Pages: 28
Radarcan R-200 User Manual preview
R-200
Brand: Radarcan Pages: 40
UNITED C5 Series Installation & Service Manual preview
C5 Series
Brand: UNITED Pages: 22
QUAD 34 Instruction Book preview
34
Brand: QUAD Pages: 17
fadini VIGILO 2250 Instruction Manual preview
VIGILO 2250
Brand: fadini Pages: 16
Jabra Link 14201-10 How Do preview
Link 14201-10
Brand: Jabra Pages: 4
jbc MV Manual preview
MV
Brand: jbc Pages: 4
jbc DI Quick Start Manual preview
DI
Brand: jbc Pages: 4
D+H RZN 4402-K V2 Original Instructions Manual preview
RZN 4402-K V2
Brand: D+H Pages: 32
Xylem CentriPro Aquavar SOLO Instruction Manual preview
CentriPro Aquavar SOLO
Brand: Xylem Pages: 48
Ascon tecnologic Y39 Operating Instructions Manual preview
Y39
Brand: Ascon tecnologic Pages: 16
Biamp TesiraFORTÉ AVB VT4 System Design Manual preview
TesiraFORTÉ AVB VT4
Brand: Biamp Pages: 2
KIOUR FA3F Quick Start Manual preview
FA3F
Brand: KIOUR Pages: 3
Topway HMT028ATB-C User Manual preview
HMT028ATB-C
Brand: Topway Pages: 14
Wave Home Solutions WV-SCBT Installer Manual preview
WV-SCBT
Brand: Wave Home Solutions Pages: 15
biodex 058-820 Instructions For Use Manual preview
058-820
Brand: biodex Pages: 20
Fibocom SU806-LA Hardware Manual preview
SU806-LA
Brand: Fibocom Pages: 79
oventrop Multidis SFQ Operating Instructions Manual preview
Multidis SFQ
Brand: oventrop Pages: 40

Brands by name

Popular brands

Load more brands