8
en | Installation and Setup
Security Escort Point Tracking Transmitter
2018.01 | SE3v1.0 | DL
Installation Manual
Robert Bosch (SEA) Pte Ltd
3
Installation and Setup
This section provides information for system planners and configurators.
3.1
Mounting the point transmitter
Notice!
Avoid mounting the point transmitter on metal surfaces as it can reduce the range of the unit.
Placing the point transmitter on ferrous metal (iron or steel) surfaces can affect operation of
the magnetic contact.
3.1.1
Recommended mounting
1.
Position the mounting plate over the desired location and attach it with the supplied
screws.
Figure
3.1: Attach mounting plate
1 Release tab
2 Mounting holes
2.
Open the cover using a screwdriver.
Figure
3.2: Open cover
1 Insert screwdriver and press here
2 Push in
3.
Be sure to note the location of the magnet when mounting the base.
4.
Slide the point transmitter over the base to lock it into place.
Summary of Contents for SEC-3402-304
Page 1: ...Security Escort Point Tracking Transmitter SEC 3402 Series en Installation Manual ...
Page 2: ......
Page 19: ......
