Bosch SBV8ZCX09N, User Manual

Page: 31 / 68

Rinse SystemNL
Filling rinse aid
Set the rinse aid amount
When the display shows "Please refill
rinse aid", fill
rinse aid. Only use rinse aid for
household dishwashers.
If streaks or water spots remain on the
dishes, adjust the amount of rinse aid.
1.
Press and lift the tab on the lid of
the rinse aid reservoir .
1.
Press.
2.
Approx. Press for 3 seconds to access
the basic settings.
3.
Press repeatedly until the display
shows "Rinse aid settings."
indicates.
2
4.
Press or repeatedly until the desired
amount of rinse aid is set.
– A low setting adds less rinse aid
during the wash cycle, reducing
the streaks on the dishes.
– A higher setting adds more rinse
aid during the wash cycle,
reducing water spots and
improving drying results.
1
2.
Top up the rinse aid up to the max
mark.
5.
To save the settings, press for
approx. 3 seconds.
max
Switch off rinse system
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
dishwasher detergent with a rinse aid
component, you can switch off the
rinse system.
3.
If rinse aid has spilled over, it must
be removed from the rinse aid
container.
Rinse aid spilled over can cause
excessive foaming during the wash
cycle.
Tip:The function of the rinse aid is
limited in combination detergents. You
usually get better results by using
rinse aid.
4.
The lid of the rinse aid
close the reservoir.
aThe lid clicks
orderly fixed.
1.
Press.
31