Bosch SBV8EDX01A, User Manual

Page: 45 / 60

Troubleshooting
aus
45
Fault Cause Troubleshooting
E:3200 or indicator for wa-
ter supply lights up.
5.
Remove the filter from the supply
hose
6.
Clean the filter.
7.
Re-insert the filter in the supply
hose.
8.
Screw the water connection back
on.
9.
Check the water connection for
leaks.
10.
Restore the power supply.
11.
Switch the appliance on.
E:9240 lights up. Filters are soiled or blocked.
▶
Clean the filters.
→ "Cleaning filters", Page 41
E:6103 lights up. Water is
not drained. Wastewater hose is blocked
or kinked.
1.
Reposition the wastewater hose
without kinks.
2.
Remove residues.
Siphon connection is still
sealed.
▶
Check the connection to the siphon
and open if necessary.
Cover of the wastewater
pump is loose.
▶
Secure the cover of the "Wastewa-
ter pump "
→
Page 55 so it clicks
into position.
E:6102 lights up. Wastewater pump is
blocked.
▶
Clean the wastewater pump.
→
"Clean wastewater pump",
Page 55
Cover of the wastewater
pump is loose
▶
Secure the cover of the "Wastewa-
ter pump "
→
Page 55 so it clicks
into position.
E:9001 lights up. Mains voltage is too low. This is not a fault on the appliance.
1.
Contact an electrician.
2.
Have the mains voltage and elec-
trical installation checked by an
electrician.