aus
15
Timer programming
You can delay the start of the programme
in 1 hour steps up to 24 hours.
–
Open the door.
–
Switch on ON/OFF switch
(
.
–
Press the button
X
+ until
‹‚
is
flaching in the timer programming
display
P
.
–
Press + or – button until the
X
displayed time corresponds with your
requirements.
–
Press START button
h
, timer
programming is activated.
–
To delete timer programming
X
,
press the + or – button until
‹‹
is
indicated on the digital display
P
.
You can change your programme
selection at any time until the
programme starts.
–
Close the door.
End of programme
The programme has ended when the
value
‹
:
‹‹
is indicated on the numerical
display
8
.
The end of the programme is also
indicated by an acoustic signal. This
function can be changed as follows:
–
Open the door.
–
Switch on ON/OFF switch
(
.
–
Hold down programme button
#
and
press START button
h
until
š
:
‹
.... is
indicated on the digital display.
–
Release both buttons.
–
Press programme button
#
until the
factory set value
›
:
‹ƒ
is indicated on
the digital display
8
.
To change the setting:
–
Press programme button
3
. Each
time the button is pressed, the set
value increases by one level; when the
value of
›
:
‹„
has been reached, the
display jumps back to
›
:
‹‹
(off).
–
Press START button
h
, the set value
is saved.
–
Close the door.
Automatic switch off / interior light
Automatic switch off after end of
programme or interior light*
* depending on model
To save energy, the dishwasher can be
automatically switched off 1 min or 120
min after the programme ends.
The setting can be selected from
˜
:
‹‹
to
˜
:
‹ƒ
.
–
Open the door.
–
Switch on ON/OFF switch
(
.
–
Hold down programme button
#
and press START button
h
until
š
:
‹
... is indicated on the digital
display.
–
Release both buttons.
–
Keep pressing programme button
#
until the value
˜
:
‹
... is indicated on the
numerical display
8
.
To change the setting:
–
Press programme button
3
.
Each time the button is pressed,
the set value increases by one level;
when the value of
˜
:
‹ƒ
has been
reached, the display jumps back
to
˜
:
‹‹
.
–
Press START button
h
.
The set value is saved.
–
Close the door.
˜
:
‹‹
Appliance does not
switch off automatically.
The interior light
1"
comes on when the door is opened
irrespective of whether the ON/OFF
switch
(
is switched on or off.
When the door is closed the light
is off. If the door is open for longer
than 60 min., the light switches off
automatically. The interior light
1"
is lit only when the set value
˜
:
‹‹
is
selected.
˜
:
‹‚
Appliance switches off after 1 min.
˜
:
‹ƒ
Appliance switches off after 120
min.
