aus
operation
36
Tip:
To assist the drying, we recom-
mend that the door will be partially
opened after the cycle.
14.7 Interrupting programme
Note:
When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1.
Open the appliance door carefully.
2.
Press .
a
The programme is saved and the
appliance switches off.
3.
Press to resume the pro-
gramme.
4.
Close the appliance door.
14.8 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
1.
Open the appliance door.
2.
Press
for approx.
4 seconds.
3.
Close the appliance door.
a
All displays light up.
a
As soon as the displays are off,
the display shows "Program was
terminated. " and then "Finished".
a
The programme is cancelled and
ends after approx. 1 minute.
14.9 Display programme in-
formation
You can show information about pro-
grammes and additional functions on
the display.
1.
Press
.
2.
Press the programme button or an
additional function.
14.10 Switching off appliance
1.
Please note the information on
Safe use →
2.
Press .
Tip:
If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
