The operation in essence NL
Start program
Cancel program
▶
on
to press.
To end a program prematurely or to
change a program that has started,
you must cancel the active program.
a The program has ended when
down the display shows "0:00".
Clues
s If you want to add crockery
while the appliance is already in
operation, do not use the tablet
tray as a handle for the upper
basket. This will allow you to come
into contact with the partially
dissolved tab.
s You can view the current program
change by canceling the program.
s To save energy, it is
appliance switches off automatically 1
minute after the end of the programme.
If you open the door immediately after
the program has ended, the appliance
will switch off after 4 seconds.
▶
Approx. 3 seconds on
to press.
a The program is aborted
and is closed after approx. 1 minute.
Switch off device
1.
The instructions for safe use
2.
on
to press.
3.
To prevent damage from escaping
water, close the tap completely (not
applicable for appliances with
AquaStop).
Tip: If you press
is pressed, the current program is
interrupted. When you switch on the
appliance, the program continues
automatically.
Pause program
Note If you open the appliance door
when the appliance has heated up, it
is best to leave the appliance door
ajar for a few minutes and then close
it. In this way you prevent an
overpressure occurring in the
appliance and the appliance door
from jumping open.
1.
on
to press.
a The program is saved
and the device turns off.
2.
on
press to continue the
program.
39
