Bosch Rexroth Tightening System 350, Manual

Page: 303 / 641

3 608 878 300 Tightening Technology | Bosch Rexroth AG 303 /641
System 350 | 3 608 878 300/2019-03
The field bus master must be programmed in a way that bytes 115 to 118 are evaluated as a torque value
for the second channel.
6.4.4.6 Example of results output with field bus
The following example is to clarify the assignment of the parameters and the results values.
The result is displayed in clear text in Figure 6–55 ; Figure 6–56 displays the contents of the storage area
in hexadecimals. The contents of the data buffer are assigned to the results in Table 6–54 ; the meaning
of the results is displayed in Table 6–55 .
Fig. 6–55: Test of the results output via the
System test

CS field bus data
function
Table 6–53:
Address
(length) 0 (4) 4 (82) 86 (7) 93 (15) 108 (15) 115 (4) 123 (15) 138
Control sign
al o
u
tput
Appl
ication block
FO 1 Appl
ication res
u
lt
in
FO 2
1
s
t ch
an
ne
l re
su
lt
fr
om
a
ppli
c
a
tion
in
FO 2
2n
d ch
an
ne
l re
su
lt
fr
om
a
ppli
c
a
tion
in
FO 2
Actual torque 0:T 3rd ch
a
nne
l re
sult
fr
om
a
ppli
c
a
tion
in
FO 2
KE erro
r
Example The last step of the tightening program was programmed with the following parameters:
• Target function Torque 100 Nm
• Monitoring function Torque:
– Lower limit 98 Nm
– Upper limit 102 Nm
• Target function Angle:
– Lower limit 50 degrees
– Upper limit 250 degrees
IMpdp interface:
• Number of I/O points: 16I+16O
• Receive data 16 bytes
• Send data 103 bytes