6.3
Pressure transducer HM20-2X/XXX-H-K35
●
Mount the pressure transducer in suspended position (hydraulic connec‐
tion at the top). This is the ideal position for bleeding the pressure trans‐
ducer.
●
Do not install an additional valve in the line between the pump and the
pressure transducer.
●
Connection the pressure transducer with a sufficient line diameter (no
minimess connections!).
Fig. 6-1:
Pressure transducer HM20-2X/XXX-H-K35 (with voltage output) and
connector (angled, 4-pin, M12x1)
Connecting the pressure transducer to the control section:
See
chapter 7.5 "Control section" on page 36
.
See documentation of the component:
Title
Document type
Material number
de (en)
Pressure transducer for hydraulic applications, type HM20-2X
Data sheet
RD 30272
(RE 30272)
Pressure transducer for hydraulic applications, type HM20-2X
Operating instructions
RD 30272-B
(RE 30272-B)
Tab. 6-3:
Documentation, pressure transducer
26/69
Mounting
Sytronix SvP 7020 PFC 03 Variable-Speed Positioning of Hy‐
draulic Axes
Bosch Rexroth AG RE 62314-B_Edition 01
