RE 90300-B/2021-01-19, Bosch Rexroth AG
About this documentation |
Axial piston units
9
/64
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of noncompliance
▶ Danger prevention measures
•
Warning sign:
draws attention to the danger
•
Signal word:
identifies the degree of the danger
•
Type and source of danger:
indicates the type and source of the danger
•
Consequences:
describes what occurs if safety instructions are disregarded
•
Precautions:
states how the danger can be avoided
Table 2: Hazard classes as defined in ANSI Z535.6
Warning sign, signal word
Meaning
DANGER
Identifies a dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING
Identifies a dangerous situation that may result in death or
serious injury if it is not avoided.
CAUTION
Identifies a dangerous situation that may result in minor to
moderate injury if it is not avoided.
NOTICE
Property damage: The product or surrounding area may be
damaged.
1.3.2 Symbols
The following symbols indicate notices that are not safety-relevant but increase
understanding of the documentation.
Table 3: Meaning of symbols
Symbol
Meaning
If this information is disregarded, the product cannot be used and/or
operated to its full extent.
▶
Single, independent action
1.
2.
3.
Numbered instruction:
The numbers indicate that the actions must be completed in order.
1.3.3 Designations
This documentation uses the following designations:
Table 4: Designations
Designation
Meaning
Threaded plug
Metal screw, pressure-resistant
Protective plug
Made out of plastic, not pressure-resistant, only for transportation
