Bosch Rexroth PSI 6100 L1 Series, Operating Instructions Manual

Page: 449 / 460

1070080028 / 08 Bosch Rexroth AG PSI 6xxx | 449 /460
Abbreviations
Meaning Abbreviation
TCP Transmission Control Protocol.
TCP controls the way in which data is exchanged between
computers. It is a link-oriented, packet-switching transport
protocol and belongs to the range of Internet protocols
(IP).
Temp. Temperature.
Tool tip Explanatory text.
Appears when the mouse pointer remains on an input
field/object for a moment.
ÜK Monitoring contact
e.g. for monitoring the pressure inside the cylinder (that
closes the electrodes) or monitoring of the electrode posi­
tion (e.g. "gun closed")
UIP Process quality.
UIR UI control
UST Upslope time
Time in which the %I increases from the beginning of the
MainWLD.
WC Weld complete contact.
This signal is output when the schedule has been com­
pleted.
WLD Weld time
A distinction is made between PreWLD (pre-heating time
or 1.WLD), MainWLD (main weld time or 2.WLD), and
PstWLD (post-heating time or 3.WLD).
All 3 weld times can be programmed separately in terms of
duration and %I.
Impulses and slope values can only be programmed for
the MainWLD.
WT Weld timer.
Weld timer, also referred to as resistance weld timer or
simply as timer.
English