Bosch Rexroth AG
, NX-BP2-36V, NX-BC36V, NX-BC36V-CN,
3608870DP0, AA
/05.2017
24/32 Operation
6
Operation
Note:
On delivery, the battery is in deep
sleep; it is activated via the activation
button. If it is inactive for 8 hours, the
battery again enters deep sleep mode.
Note:
Voltage cannot be measured at the
connecting terminals.
6.1
Charging the battery
The battery is delivered partly charged. To
ensure full battery power, fully charge the
battery in the charger before using it for the
first time.
Note:
If used properly, the battery can
be recharged at least 500 times.
Charging the battery
1.
Connect the battery charger to a
suitable receptacle using the power
supply cable.
The charging condition indicator is lit
for 3 seconds.
Fig. 4: Inserting the battery into the charger
2.
Insert the battery completely into the
charger.
The battery is charged immediately.
The charging condition indicator shows
thecharging condition of the battery.
CAUTION
Unsuitable battery chargers might
cause damage!
If it is charged inappropriately, the
battery may be overheated or
damaged!
Only use the original battery charger
(type NX-BC36V / NX-BC36V-CN).
This charger matches the battery
optimally.
Table 4: Charging condition indicator on the
battery
LEDs are lit
LEDs are
flashing
0.5 s ON /
0.5 s OFF
Residual
capacity
None
1
0-16%
1
None
17-33%
1, 2
None
34-50%
1, 2, 3
None
51-67%
1, 2, 3, 4
None
68-83%
1, 2, 3, 4, 5
None
>83%
Summary of Contents for Rexroth NX-BC36V
Page 31: ......
