manualshive.com logo in svg

Bosch Rexroth LU 2, Assembly Instructions Manual, Page: 32 / 54

Share
Download
Bosch Rexroth LU 2 Assembly Instructions Manual Download Page 32

32/54 Installation

Bosch Rexroth AG

, MIT: LU 2, 3 842 358 814/2017-01

 

Fig. 12:  

1...

2

6

5

2

4

D

358 814-22

1

E

4

3

GN

GN

Install drive with oil container LC 2 in support bracket

  Please note

:

 

• Set the delivery volume 

(see page 15 and 18), 

before

 removing the 

plug and screwing the 
lubrication unit in the 
support bracket.

 

• The oil container may only 

be bolted 1x.

 

• Oil may leak from the 

oil container during the 
following operations.

1. 

Label the oil container 
with the assembly and 
the expiration date.

2. 

Remove the oil container 
plug.

3. 

Screw the lubrication 
unit by hand into the 
support bracket (E).

4. 

Close the holder (D).

5. 

Remove the protective 
cap.

6. 

Connect the connection 
cable to the lubrication 
unit.

  Please note

:

 

• After connecting the power 

cable and with supply 
voltage present, the LED 
indicators fl ash green (GN) 
in 5 s intervals.

 

• A  fl ashing arrow icon 

d

 

appears in the display.

 

• The lubricating unit is ready 

for operation with the 
parameters previously set.

  Please note

:

Only in pulse mode

: 

After re-establishing the supply voltage 

a delivery process is 

carried out. During the delivery the drive and the LED indicators fl ash at 1 s intervals.

358814_2017_01_EN.indd   32

16.01.2017   13:38:19

Summary of Contents for Rexroth LU 2























































Reviews:

No comments