Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 93 / 382

Description Symbol Unit
HCS03.1E-
W0070-_-05
HCS03.1E-
W0100-_-05
HCS03.1E-
W0150-_-05
HCS03.1E-
W0210-_-05
required wire size according to
IEC 60364‑5‑52; at I
L_cont
11)
A
LN
mm 2 16 35 50 95
required wire size according to
UL 508 A (internal wiring); at I
L_cont
(UL) 12)
A
LN
AWG AWG 8 AWG 4 AWG 2 AWG 1/0
1) 600 V AC or less, use listed AC input line fuses or listed circuit breakers
2) 3) mains voltage > ULN: use a transformer with grounded neutral point,
don't use autotransformers!
4) otherwise use mains choke HNL
5) HMV0x.xR: Rsc=100; HMV0x.xE, HCS0x.xE: Rsc=50
6) depending on mains input voltage ULN; HMV01.1R see following note;
HMV: constant current charge, HCS: resistance charge; minimum of
250.000 load cycles
7) without external capacities on DC bus
8) 9) find interim values by interpolation
10) at PDC_cont
11) copper wire; PVC-insulation (conductor temperature 70 °C); installation
method B2; Table B52-4; Ta ≤ 40 °C
12) copper wire; PVC-insulation (conductor temperature 90 °C); Table
13.5.1; Ta ≤ 40 °C
Fig.5-67: HCS - Data for mains voltage supply
Qualitative characteristic TPF vs. DC bus power PDC_cont
1 with mains choke
2 without mains choke
Fig.5-68: Qualitative characteristic TPF vs. DC bus power PDC_cont
DC Bus
Data of power section - DC bus
Description Symbol Unit
HCS03.1E-
W0070-_-05
HCS03.1E-
W0100-_-05
HCS03.1E-
W0150-_-05
HCS03.1E-
W0210-_-05
DC bus voltage
U
DC
V ULN x 1,41
capacitance in DC bus
C
DC
mF 0,94 1,44 1,88 4,70
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 83/369
Power Sections for Converters - IndraDrive C