CAUTION
Risk of injury by improper handling! Bodily injury by bruising, shearing,
cutting, hitting!
●
Observe the general construction and safety regulations on handling and
mounting.
●
Use suitable devices for mounting and transport.
●
Avoid jamming and bruising by appropriate measures.
●
Always use suitable tools. Use special tools if specified.
●
Use lifting equipment and tools in the correct manner.
●
If necessary, use suitable protective equipment (for example safety gog‐
gles, safety shoes, safety gloves).
●
Do not stand under hanging loads.
●
Immediately clean up any spilled liquids because of the danger of skidding.
3.2.7
Battery Safety
Batteries consist of active chemicals enclosed in a solid housing. Therefore,
improper handling can cause injury or material damage.
CAUTION
Risk of injury by improper handling!
●
Do not attempt to reactivate low batteries by heating or other methods (risk
of explosion and cauterization).
●
Do not recharge the batteries as this may cause leakage or explosion.
●
Do not throw batteries into open flames.
●
Do not dismantle batteries.
●
When replacing the battery/batteries do not damage electrical parts in‐
stalled in the devices.
●
Only use the battery types specified by the manufacturer.
Environmental protection and disposal! The batteries contained in
the product are considered dangerous goods during land, air, and
sea transport (risk of explosion) in the sense of the legal regulations.
Dispose of used batteries separate from other waste. Observe the
local regulations in the country of assembly.
3.2.8
Protection Against Pressurized Systems
According to the information given in the Project Planning Manuals, motors
cooled with liquid and compressed air, as well as drive controllers, can be par‐
tially supplied with externally fed, pressurized media, such as compressed air,
hydraulics oil, cooling liquids and cooling lubricating agents. Improper handling
of the connected supply systems, supply lines or connections can cause injuries
or material damage.
Project Planning Manual | Rexroth IndraDrive
Electric Drives
and Controls
| Bosch Rexroth AG
15/369
Safety Instructions for Electric Drives and Controls
Summary of Contents for Rexroth lndraDrive HCS02 Series
