Bosch Rexroth IndraDrive Mi Page 257 Project Planning Manual Download

Page: 257 / 340

9.4

KCU02

9.4.1

Mounting depths

Adjusting Mounting Depths

HMV01 and HCS03 devices have greater mounting depths than the drive

connection box KCU. For connecting the drive connection box KCU to an

HMV01 or HCS03 device, you must therefore use the control cabinet adapter

HAS03.1-002

which compensates the different mounting depths.

9.4.2

Touch Guard

Lethal electric shock by live parts with more

than 50 V!

WARNING

●

The appropriate touch guard must be mounted for each device following

connection work.
Never operate the device without mounted touch guard.

●

Never mount a damaged touch guard.

●

Immediately replace a damaged touch guard by an undamaged touch

guard.

●

Keep the cutouts at the touch guard as small as possible. Only remove

the cutouts if necessary.

Cutouts at the Touch Guard

●

If the DC bus and the control voltage are connected by means of contact bars,

only cutout A may be removed from the touch guard.

●

If the DC bus and the control voltage are connected by means of cables (e.g. in

case of multiple-line arrangement), cutouts A, B and C may be removed from

the touch guard.

●

At the first and last device in a line of interconnected devices, cutouts may not

be removed from the outer side of the touch guard.

Tab. 9-3:

Cutouts at the Touch Guard

DOK-INDRV*-KCU02+KSM02-PR03-EN-P

Bosch Rexroth AG

255/337

Rexroth IndraDrive Mi Drive Systems with KCU02 KSM02, KMS02/03, KMV03, KNK03

Mounting and installation

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth IndraDrive Mi





















































































































































































































































































































































Search results

Summary of Contents for Rexroth IndraDrive Mi

Reviews:

Related manuals for Rexroth IndraDrive Mi

Brands by name

Popular brands

Bosch Rexroth IndraDrive Mi, Project Planning Manual

Search results

Summary of Contents for Rexroth IndraDrive Mi

Reviews:

Related manuals for Rexroth IndraDrive Mi

Brands by name

Popular brands