Bosch Rexroth IndraControl VCP 08.2, Project Planning Manual

Page: 34 / 78

6 -2 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 08 | R911310379 / 02
Display and Operating Components
The new contrast setting becomes effective immediately after the Enter
key is pressed. If necessary, repeat the steps two and three until you
are satisfied with the contrast.
6.1.2 Character Attributes
The following character attributes can be displayed on the operating
device:
– Flashing
– Underline
– Foreground/background color
6.1.3 Fonts
You can use Windows fonts. Windows and unicode character sets are
possible.
6.2 Keyboard
The keys are positioned under an environmental-proof polyester foil.
You project the operating principle of the keys in the programming soft-
ware.
6.2.1 Editing Keys
To activate the edit mode, you must press the data release key at first.
After the status LED „data release“ lights up an input with the edit keys
is possible.
The key 0 and ()° is used to edit data in the editor. The characters (, )
and ° can be entered if the system variable Shift or ShiftCase is con-
figured.
The key 1 and STU is used to edit data in the editor. The characters S,
T and U can be entered if the system variable Shift or ShiftCase is con-
figured.
The key 2 and VWX is used to edit data in the editor. The characters V,
W and Y can be entered if the system variable Shift or ShiftCase is con-
figured.