7
-2
Bosch Rexroth AG
| Electric Drives and Controls
Rexroth IndraControl VCP 05
|
R911310377
/
02
Interfaces
7.1
Standard Interfaces
7.1.1
Ethernet (X5)
A 10/100 Base-T Ethernet interface is located on the side of the operat-
ing device.
7.1.1.1
Pin Assignment
Connector in the small operator terminal: RJ45 female connector.
7.1.1.2
Cable
Pin
Designation
Function
1
Tx+
Transmitted Data, Positive Polarity
2
Tx-
Transmitted Data, Negative Polarity
3
Rx+
Received Data, Positive Polarity
4
n.c.
Not connected
5
n.c.
Not Connected
6
Rx-
Received Data, Negative Polarity
7
n.c.
Not Connected
8
n.c.
Not Connected
Fig. 7-2:
Pin assignment of the Ethernet interface
A twisted-pair cable of category 6+ (CAT 6+) must be used. The maxi-
mum cable length is 100 m (328 feet).
See the IEEE 802.3 standard for further information.
Summary of Contents for Rexroth IndraControl VCP 05.2
Page 77: ......
