7.5.3
Characteristics of the Digital Inputs
Input types
Type 1, according to EN 61131-2
Number of inputs
16
Status display by LED
Green
Electrical isolation
Yes (to logic supply)
Reverse voltage protection
Yes
Plug-in pin spacing
3.5 (Weidmüller terminal)
Fig.7-13:
Characteristics of the digital inputs
7.5.4
Characteristics of the Digital Outputs
Output type
Semiconductor outputs, non-saving;
protected, with automatic restart, current-carrying
Number of outputs
8
Status display by LED
Green
Electrical isolation
Yes (to logic supply)
Reverse voltage protection
Only guaranteed without load connection
Defect of the device caused by
●
polarity reversal with simultaneous short-cir‐
cuit of the output lines,
●
polarity reversal with simultaneous connection
of externally polarized suppressor diodes at
the output lines
●
Applying an external voltage > U
Q
Output voltage
Nominal value
24 V
Rated output current
Nominal value:
UL rating:
0.2 A
0.2 A general purpose
5 W Tungsten
Simultaneity factor
100 %
Plug-in pin spacing
3.5 (Weidmüller terminal)
Fig.7-14:
Characteristics of the digital outputs
Bosch Rexroth AG
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
60/93
Interfaces
