8
Standards
8.1
Used Standards
Standard
Description
DIN EN 60 204-1
Electrical equipment of machines
DIN EN 61 131-2
Programmable logic controllers
Equipment and tests requirements
DIN EN 60 529
Degrees of protection (including housings and installa‐
tion compartments)
UL 508
Industrial Control Equipment
Fig.8-1:
Used standards
8.2
CE Mark
8.2.1
Declaration of Conformity
The electronic products described in these instructions comply with the re‐
quirements and targets of the following EU Directive and with the harmonized
European standards:
EMC Directive 2004/108/EC
The electronic products described in the present instructions are intended for
operation in industrial environments and comply with the following require‐
ments:
Standard
Title
Issue
DIN EN 61000-
6-4
(VDE 0839-6-4
)
Electromagnetic compatibility (EMC)
Part: 6-4: Generic standards – Emission standard
for industrial environments (IEC 61000-6-4:2006)
September
2007
DIN EN 61000-
6-2
(VDE 0839-6-2
)
Electromagnetic compatibility (EMC)
Part: 6-2: Generic standards – Noise immunity for
industrial environments (IEC 61000-6-2:2005)
March 2006
Fig.8-2:
Standards on the electromagnetic compatibility (EMC)
Loss of CE conformity due to changes to the device.
The CE marking is only valid for the device in its delivery status.
After having modified the device, the CE conformity is to be veri‐
fied.
8.3
UL/CSA Certified
The devices are certified according to
●
UL508 (Industrial Control Equipment) and
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG
19/65
Standards
