3 609 929 B64/2008-05 | IMpnio
Bosch Rexroth AG
23
ENGLISH
ENGLISH
ITALIANO
ESPAÑOL
PORTUGUÊS
SVENSKA
FRANÇAIS
1. Always switch off the power supply to the
relevant system component before
assembling the IMpnio interface module.
2. Insert the IMpnio interface module into
the appropriate slot on the system
component until it catches (example in
Fig. 2).
3. Tighten the torx screws on the front until
the front panel is flush. The circuit board
is locked by turning the screw.
This lock is only fully functional once the
interface has been properly tightened
(see Fig. 3).
Fig. 2: Example: Inserting the interface module
Fig. 3: Lock effect
1 Lock
1
