18
/84
Bosch Rexroth AG
IMdev | 3 609 929 B41/2008-09
2 General safety instructions
out by qualified technical personnel or an
instructed person under the direction and
supervision of qualified personnel.
Qualified personnel are those who can
recognize possible hazards and institute the
appropriate safety measures due to their
professional training, knowledge, and
experience, as well as their understanding of
the relevant conditions pertaining to the work
to be done. Qualified personnel must
observe the rules relevant to the subject area.
Safety instructions in this document
In this manual, there are safety instructions
before the steps whenever there is a danger
of personal injury or damage to the
equipment. The measures described to avoid
these hazards must be observed.
Safety instructions are set out as follows:
•
Safety sign (warning triangle)
: draws
attention to the risk
•
Signal word:
identifies the degree of
hazard
•
Type of risk:
identifies the type or source
of the hazard
•
Consequences:
describes what occurs
when the safety instructions are not
complied with
•
Precautions:
states how the hazard can
be avoided
The signal words have the following meaning:
Adhere to the following instructions
General safety instructions
Observe the regulations for accident
prevention and environmental protection for
the country where the product is used and at
the workplace.
Exclusively use Rexroth products in good
technical order and condition.
Check the product for visible defects, for
example damage to the printed card,
components, housing, and plug connectors
or missing screws.
Only use the product within the performance
range provided in the technical data.
Persons who assemble, operate,
disassemble or maintain Rexroth products
must not consume any alcohol, drugs or
pharmaceuticals that may affect their ability
to respond.
The warranty only applies to the delivered
configuration.
SIGNAL WORD
Type of RISK!
Consequences
Precautions
This warning symbol cautions
against dangers to your health.
Observe all the safety instructions
that follow this symbol to avoid
possible injuries or death.
This warning symbol cautions
against dangers to your health
caused by electrical voltage or
currents. Observe all the safety
instructions that follow this
symbol to avoid possible injuries
or death.
CAUTION
CAUTION
indicates a potentially
hazardous situation which, if not avoided,
could result in minor or moderate injury or
damage to equipment.
IMdev.book Seite 18 Donnerstag, 25. September 2008 1:40 13
