RE 15326-WA, Version 06.2020, Bosch Rexroth AB
Safety instructions |
Hägglunds DUc Drive unit 7/88
2 Safety instructions
2.1 About this chapter
This product has been manufactured in strict compliance with the generally
accepted rules of technology. However, this does not exclude the risk of damage
to persons or property if this chapter and the safety instructions included in the
present documentation are not observed.
▶
Read the entire documentation carefully before starting to use the product.
▶
Keep this documentation in a location where it is accessible to all users at any
time.
▶
When passing over the product to third parties, make sure to include the
necessary documentation.
2.2 Intended use
The Hägglunds DUc drive unit is a hydraulic power unit.
In the application the Hägglunds DUc Drive Unit is classified as a partly completed
machinery. The European version in the sense of the EU machine directive
2006/42/EC. A partly completed machinery is exclusively intended to form an
incomplete or a complete machine together with other components or partly
completed machineries. The Drive Unit may only be commissioned after it has
been installed in the machine/system for which it is intended and the safety of the
entire system has been established in accordance with the machine directive.
Intended use includes having read and understood the complete documentation,
especially the chapter
.
The product is intended for the following use:
•
Create hydraulic flow in a closed loop hydraulic system.
Special Drive Units
Standard Drive Units are not allowed to be used beside an ambient temperature of
-20 °C to 40 °C (-4 °F to 104 °F), or in areas with potentially explosive
atmospheres.
Drive Units intended for use in ambient temperature below 0 °C (32 °F), will be
fitted with special optional equipment for preheating the hydraulic system before
start.
Observe the technical data, application and operating conditions and performance
limits as specified in the product-specific documentation and in the order
confirmation.
