22/48
Transport and storage
Bosch Rexroth AG
, DBET.../...XE, RE29162-XE-B/10.20
6 Transport and storage
6.1 Transporting the valve
CAUTION
Danger of damage to property and personal injuries!
With improper transport, the valve can fall and lead to damage and/or injuries since
the parts are e.g. sharp-edged, oily, instable, loose or bulky.
▶
Use the original packaging for transport.
▶
Use personal protective equipment (such as gloves, working shoes,
safety goggles, working clothes, etc.).
▶
Comply with the national laws and regulations regarding occupational health
and safety and transport.
▶
Do not transport the valve using components with low stability, e.g. solenoids,
connectors or cables.
Sharp edges!
Danger of cut injuries!
▶
Wear suitable protective equipment for the transport of the valve.
Further information regarding transport is available from Bosch Rexroth,
see chapter 16.1 "List of addresses".
Report any transport damage to your responsible sales contact person within
one week. The addresses of the sales subsidiaries can be found on the Internet at:
http:/www.boschrexroth.com/addresses
6.2 Storing the hydraulic valve
Valves are delivered in a perfect state.
For transportation and storage of the product, always observe the
environmental conditions specified in
"Data sheet 29162-XE"
. Improper storage
may damage the valve.
Valves can be stored for up to 12 months under the following conditions:
▶
Observe the storage temperature range indicated in
"Data sheet 29162-XE"
.
▶
The relative air humidity must not exceed 65%.
▶
The storage rooms must provide 100% UV protection.
▶
No ozone formation may occur near the storage facility.
▶
Do not store the valve outdoors but in a well-ventilated room.
▶
The storage facilities must be free from etching substances and gases.
▶
Protect the valve against humidity, particularly ground humidity. Store the valve
on a shelf or on a pallet.
▶
Store the valve protected against impacts and sliding and do not stack it.
