Bosch rexroth CytroForce-M, Operating Manual

Page: 7 / 85

7 / 85
Servo-hydraulic actuator
Representation of information
Bosch Rexroth AG RE62270-B, 01.21
Title Document
number
Document type
Diaphragm-type accumulator, type HAD R: 50150 Data sheet
Pressure relief valve, direct operated, type
DBD
R: 25402 Data sheet
Temperature sensor IFM TA2105 see website of
the manufacturer,
ifm
A part of the documentation listed above is also stored on the microSD card
that is included in the scope of delivery.
1.3 Representation of information
In order that this documentation allows you to work directly and safely with
your product, standardized safety notes, symbols, terms, and abbreviations are
used. For a better understanding, they are explained in the following sections.
Safety instructions
In this documentation, safety instructions are contained in
⮫
Chapter 2.6
“Product-specific safety instructions” on page 13 and
⮫
Chapter 3 “General
information on damage to property and damage to the product” on page 17
and wherever sequences of actions or instructions are explained which bear
the risk of personal injury or damage to property. The hazard avoidance meas-
ures described must be observed.
Safety instructions are structured as follows:
WARNING
Type and source of danger! and consequences in the
case of non-observance
−
Hazard avoidance measures
●
Warning symbol: draws attention to a hazard
●
Signal word: identifies the degree of hazard
●
Type and source of danger!: identifies the type and source of hazard
●
Consequences: describes the consequences in case of non-compliance
●
Precautions: states, how the hazard can be avoided
DANGER
In case of non-compliance with this safety instruction,
death or serious injury will occur.
WARNING
In case of non-compliance with this safety instruction,
death or serious injury could occur.
CAUTION
In case of non-compliance with this safety instruction,
minor or moderate injury could occur.
NOTICE
In case of non-compliance with this safety instruction,
property damage could occur.
Designations
The following terms are used in this documentation:
Table 1: Designations
Designation Meaning
IndraWorks Ds Bosch Rexroth service tool for drive
commissioning