34/40
Technical data
Bosch Rexroth AG
, Manifold block type AGEV1-48404-AA/HM/L01H01-XC, RE 62272-B/03.19
14.2 Fault table
Manifold blocks are usually not sensitive to faults if the prescribed operating
conditions and hydraulic fluid quality are complied with.
In the case of faults of individual components refer to the product description or
operating instructions of the components, see 16.1“List of addresses“.
15 Technical data
Tabelle 8: Technical data
General
Installation orientation
optional
Installation conditions
Coasts and offshore with salt-laden air
Admissible ambient temperature range °C -20...+50
Storage temperature range
°C
-10...+50
Weight
kg
160
Surface protection
CP7A DCCS92010, corresponds to C5M,
medium, in line with DIN EN ISO 12944-2
Hydraulic
Hydraulic fluid
Technical specification:
AVIA Syntofluid PE-B 50
Hydraulic fluid temperature range °C -20...+80
Max. permissible degree of contamination of the
hydraulic fluid
Cleanliness class according to ISO 4406 (C)
Class 19/17/14
Permissible pressures in ports
Tank port (AAHL, BAHL)
bar 50
Leakage oil port (Y) bar 20
Pressure port (AAL, BAHL) bar 300
Pilot pressure (X1AL)
bar
max. 120
1)
Load pressure (piston side, measured at 1.03)
bar
corresponds to 100 bar, max. 300 bar
Load pressure (piston rod side, measured at
2.03)
bar
corresponds to 132 bar, max. 300 bar
Factory settings of valves when delivered
Pressure relief valve (2.04)
bar Setting 160 bar at the time of delivery
Counterbalance valve (1.02, 2.02) bar Customer setting on site, 50 bar at the time of
delivery
Fault
Possible cause
Remedy
External leakage
Seals on connection face damaged
Remove the hydraulic component and replace
the seals.
Other leakage
Replace leaky hydraulic valves.
