MoveMode
en
11
8 MoveMode
You can use this function to change the power level of
an item of cookware by simply sliding it forwards or
backwards in the flexible cooking zone. The zone is di-
vided into three areas with different power levels.
8.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡
Front area = power level
¡
Middle area = power level
¡
Rear area = power level
.
You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section →
.
8.2 Activating MoveMode
Requirement:
Only place one item of cookware on a
flexible zone.
1.
Select one of the two cooking zones in the flexible
zone.
2.
Press
.
a
The power level in the area in which the cookware
is located lights up in the cooking zone display next
to
.
a
The function is switched on.
Note:
You can change the power levels during cook-
ing.
8.3 Deactivating MoveMode
▶
Touching
a
The display beside
switches off.
a
The function has been deactivated.
9 Extended FlexInduction
With the extended cooking zone, you can cook with lar-
ger cookware or position long cookware sideways on.
The extension always switches on in conjunction with
one of the two flexible cooking zones. You cannot
switch the extension on separately.
9.1 Position the cookware according to
weight and size
Position the cookware in the middle over the rear part
of the flexible cooking zone and its extension.
Depending on the size of the cookware and the
covered cooking surface, you can switch on the flexible
cooking zone as two separate cooking zones or as one
connected cooking zone:
